Custom Wood Veneer 45 minute mineral core commercial wood doors are fire rated doors designed to slow the spread of fire and smoke while maintaining the appearance of architectural commercial wood doors. They are manufactured with non-combustible mineral cores made from gypsum and fire-resistant materials, then reinforced with hardwood stiles and rails and finished with wood veneer, HDF, or laminate faces.

These fire rated commercial wood doors are commonly used in office buildings, schools, hospitals, hotels, multifamily housing, and government facilities. They are typically installed in fire-rated corridors, tenant separation walls, exit access hallways, and openings between offices and rated corridors.

45 minute fire rated wood doors help protect egress paths, mechanical rooms, storage areas, and other spaces requiring code compliance. Available with factory finishes and compatible with commercial hardware, mineral core doors provide essential life safety protection while maintaining a professional interior appearance.

General Description

• Architectural 5-ply mineral core commercial wood door
• 45-minute fire rated (Positive Pressure Category B)
• Bonded core construction
• Grade A hardwood veneer or plastic laminate faces
• Listed by Warnock Hersey International (WHI)
• Designed for openings requiring a 45-minute fire barrier

Product Features & Specifications

• Maximum single door size: 4’0″ x 9’0″
• Maximum pair or double egress: 8’0″ x 8’0″
• Sizes may vary based on hardware requirements
• Concealed intumescent seals available at meeting stiles

Door Construction

• Thickness: 1-3/4″
• Core: Mineral core
• Crossband construction with face veneer

Stiles and Rails

• Stiles: 1″ Georgia Pacific Firestop at hinge and latch locations
• Rails: 1-1/2″ top rail and 1″ bottom rail (Georgia Pacific Firestop)
• Stile and rail dimensions may vary based on hardware prep

Door Faces

• Premium Grade 5-ply hardwood veneers
• High density fiberboard (HDF) options
• High pressure decorative laminate (HPDL) options

Adhesives

• Type-II interior adhesive

Lites and Louvers

• Vision lites must be at least 6″ from door edges
• Viewers up to 1″ diameter allowed
• Maximum visible glass size: 36″ x 54″
• Larger glass available with specialty fire-rated glazing

Fusible Link Louvers

• Maximum area: 1140 sq. in. within lower 40″ of door
• Maximum size: 30″ x 38″
• Minimum 5″ from door edge or hardware prep
• Minimum 10″ from door bottom
• Not allowed with fire exit hardware or vision panels

Machining & Preparation

• Must be factory machined for hardware
• Field prefitting allowed by licensed WHI dealer
• Metal edges allowed only when no concealed intumescent is required

Finishing Options

• Available unfinished or factory finished
• Water-borne UV finish available
• Meets WDMA/AWI TR-6 standards
• EPA and CARB compliant

Warranty

• Lifetime warranty (per manufacturer terms)